Galvanized (+Z) Steel – Manisa, Izmir galvanized steel service.

Galvanized (+Z) Steel – Manisa, Izmir galvanized steel service.

Hot dip galvanized steels are manufactured by the continuous zinc coating of cold rolled coils. Bare surface material passes through a bath of molten zinc and gets coated. At the exit point, air blades sweep excess zinc by the means of pressurized air flow leaving a thin layer of zinc on surface.

The main advantage of galvanized steels over cold rolled steels is their resistance to corrosion and longer life span. This feature makes them a good choice for automotive industry and for products that are subject to ambient conditions. such as cladding, roofs, doors, fences, and various profiles.

Galvanized materials’ surface qualities are produced in accordance with international standards in three different surface types A, B and C (best quality). In accordance with EN 10346 surface qualities are described as seen below. 

Galvanized Steels According to Surface Quality

Surface quality A Galvanized Steel:

Imperfections such as dips, scratches, variations in surface appearance, dark spots, light passivation stains are permissible. Stretch levelling breaks or run-off marks may appear.

Surface quality B Galvanized Steel:

It is obtained by skin passing. Minor imperfections such as slight scratches, skin-pass marks, stretch levelling breaks, run-off marks, surface structure and light passivation stains are permissible.

Surface quality C Galvanized Steel:

It is also obtained by skin passing. The surface shall be of homogenic property to enable high-class paint finishing. The reverse surface shall at least have the characteristics of surface quality B.

The hot dipped galvanized steel grades we offer as Ferineks are as in the table.

Application Standard Grade*
Zinc coated low carbon steels for cold forming EN 10346
2015
DX51D+Z
DX52D+Z
DX53D+Z
DX54D+Z
DX56D+Z
DX57D+Z
Soğuk şekillendirme için yüksek mukavemetli, düşük alaşımlı, çinko kaplı çelikler EN 10346
2015
HX300LAD+Z
HX340LAD+Z
HX380LAD+Z
HX420LAD+Z
Zinc coated, dual-phase steel with high yield strength for cold forming EN 10346
2015
HCT490X+Z
HCT590X+Z
HCT600X+Z
HCT780X+Z
Zinc coated bake-hardening steels EN 10346
2015
HX220BD+Z
HX260BD+Z
HX300BD+Z
Zinc coated IF steel EN 10346
2015
HX180YD+Z
HX220YD+Z
Zinc coated structural steels EN 10346
2015
S220GD+Z
S250GD+Z
S280GD+Z
S320GD+Z
S350GD+Z

Dimesional options are seen below.

Thickness Range (mm) Width Range (mm) Length (mm) Weight (kg)
0,25 – 3 19 – 1.670 Coil, band or cut to length Various

Please contact Ferineks sales team for other dimensions

We pioneer Ferineks steel, Manisa galvanized steel and Izmir galvanized steel services.

en_USEnglish